Industrial Mesh AP WD-G30A

Industrial Wi-Fi AP
WD-G30A

Brief Introduction

WD-G30A Industrial grade wireless AP are designed for industrial wireless communication. Suitable for different industrial applications, especially in the factory office network wireless coverage, factory workshop wireless coverage, factory warehouse wireless coverage and other aspects play an irreplaceable role; The equipment is easy to install, can be installed by guide rail or installed in the wiring box. Support rail mounting, wide temperature operation, IP40 protection level and LED indicator function. The product supports IEEE 802.11ac communication protocol standard. Communication stability, no crash, no disconnection, the number of users, fast speed and other advantages.

Features
IEEE802.11a/ B/G/N/AC independent dual-channel RADIO module;
the highest wireless rate up to 11N MIMO 300Mpbs + 11AC MIMO 867Mbps;
3* GIGABit LAN port;
AP mode;
Supports universal Spanning Tree Protocol (STP) and Fast Spanning
Tree Protocol (RSTP);
Supports rate limiting management for wireless clients.
Supports QoS based on WMM standards.
Supports MAC address list control and filtering.
Anti-DOS attack;with SSID broadcast enable control function;
Device software is restarted and hardware is reset.
can be externally connected to a variety of high-gain antennas, so that the signal of high transmission quality can cover a larger range or
transmit a longer distance, or in the electromagnetic environment with large interference;
has remarkable high and low temperature stability and can be used in various extreme climate conditions around the world;
adapt to a variety of power supply modes, a wide range of applications
support DC 9-36V/DC 18-75V two power supply modes;
supports serial port to Ethernet, 485 to Ethernet, and 232 to Ethernet transparent communication, with a maximum baud rate of
115200bps (the three transparent transmission modes cannot work at
the same time, and only one of them can be selected).
Built-in high-power WIFI PA, maximum transmission power 26dbm;
external dual-frequency 5Dbi high gain antenna;
supports WIFI WPS;
Support extended antenna, external standard SMA interface;
Built-in WDT watchdog to ensure the normal operation of the system;
supports 7*24 hours;
network self-organizing, self-healing;
Supports multiple advanced security policies.
uses 802.11ac wave2, MU-MIMO, beam shaping and multiple antennas

Specification

Model	WD-G30A
Interface	310/100/1000Base-TX self adaption RJ45，2DC power interface, 1*UART/232/485
LED play	Ethernet Power 2* Wireless indicator WPS
Protocol（PHY）	IEEE802.3，IEEE802.3x, IEEE802.3u IEEE802.11a/b/g/n/ac
Transfer rate	2.4G: 300Mbps 5.8G:867Mbps
Manageability	Local Firmware update
	802.1D Ethernet Bridge
	Quality of Service(QoS)
Working voltage	DC 9-36V/DC 18-75V
Work temperature	-40℃-85℃
Size	130x100x40mm（L×W×H）
Weight	About 0.40kg
Operating environment	Operating humidity:10%-85% (no condense) Storage humidity: 5%-90%(no condense)
Power rating	15-20W
Certification	FCC、CE class B,WEEE,RoHS